Gates TP190XL025 PowerGrip Twin Power Timing Belt

$14.41
Out of stock
Part Number
9246-1113

-Gates Part Number: TP190XL025
-SKU: 9246-1113
-Belt Pitch Length: 19”
-Number of Teeth: 95

Belt Quick Information

-Gates Part Number: TP190XL025
-Belt Pitch Length: XL”
-Number of Teeth: Pitch Length

PowerGrip Twin Power Timing Belts

Twin Power belts have teeth on both sides to provide synchronization from both driving surfaces.

We’re Taking Down Downtime.

Gates PowerGrip Twin Power Timing belts run quieter than roller chain drives and eliminate the need for lubrication and re-tensioning to reduce maintenance, downtime and labor in your operations.

Markets/Applications

PowerGrip Twin Power Timing Belts are suitable for all industrial serpentine applications requiring rotation reversal in some driven shafts.

Features/Advantages

  • Gates Twin Power belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt.
  • Belt capacity is equal to standard single-sided PowerGrip Timing Belts.
  • Fiberglass Tensile Cord provides protection against grime, grease, oil, and moisture.
  • Quieter than roller chain drives and eliminates lubrication and re-tensioning to reduce maintenance and labor.
  • Wear Resistant nylon fabric on both tooth sides to provide equal load carrying capabilities on either side of belt.
  • Temperature Range: -22°F to +212°F (-30°C to +100°C).
  • Precision formed elastomeric teeth and body.
  • Free of lubrication and maintenance.
  • High efficiency, non-slip positive drive.
  • High tooth jump resistance.
  • Available in XL, L, H pitch.

Notes

-Gates PowerGrip Twin Power Timing belt part numbers are comprised of pitch length, pitch, and width. TP denotes Twin Power.

  • Length – The length is shown in the first part of the belt designation. The first number is the pitch lengths in tenths of an inch. A TP190XL025 has a XL” Pitch Length.
  • Pitch – The pitch of a PowerGrip Twin Power Timing belt is the distance from center to center of the teeth (in inches). It is shown in the second part of the belt designation by a letter or letters. Part Number TP190XL025 has a 0.200” pitch. The letters correspond to the pitches as follows.
    • XL – Extra Light – 0.200” Pitch
    • L – Light – 0.375” Pitch
    • H – Heavy – 0.500” Pitch
  • Width – The width is shown in the last part of the belt designation. Part number TP190XL025 is 0.25” wide.

Give Your Applications 100% on Both Sides, Without Compromise.

Twin Power can transmit up to 100% of its maximum rated load from either side of the belt; alternatively, it can transmit a load on both sides – provided the sum of the loads does not exceed the maximum capacity.

More Information
Part Number TP190XL025
Length (inch) 19
Length (mm) 483
Length Type Pitch Length
Number of Teeth 95
Top Belt Width per strand (inch) 0.25
Top Belt Width per Strand (mm) 6.35
Weight 0.3
Core Material Chloroprene / Nylon Cover
Write Your Own Review
You're reviewing:Gates TP190XL025 PowerGrip Twin Power Timing Belt
© 2022 Beiler Hydraulics  All Rights Reserved.